The Thermofluid Aerodynamics Systems Design and Engineering track in the Aerospace Engineering MSAE program is designed to prepare students for careers as engineers in aerospace. The program includes the fields of controls and dynamics, aerodynamics, propulsion, thermal analysis, and design.
Please note: This program may be completed online, although not all elective options or program prerequisites may be offered online. Newly admitted students choosing to complete this program exclusively via UCF online classes may enroll with a reduction in campus-based fees. See
http://ucf.edu/online for more information.
International students (F or J visa) are required to enroll in a full-time course load of 9 credit hours during the fall and spring semesters. Only 3 of the 9 credit hours may be taken in a completely online format. For a detailed listing of enrollment requirements for international students, please visit www.international.ucf.edu. If you have questions, please consult International Affairs and Global Strategies at 407-823-2337.
UCF is not authorized to provide online courses or instruction to students in some states. Refer to State Restrictions for current information.
|The MSAE is awarded upon completion of a minimum of 30 credit hours, including 12 credit hours of required courses, 12 credit hours of elective courses selected from an approved list of courses, and an additional 6 credit hours in either a thesis or nonthesis option.|
|Total Credit Hours Required:|
Credit Hours Minimum beyond the Bachelor's Degree|
All students must identify an adviser
and file an official degree program of study prior to the completion of 9 credit
hours of study. The program of study must be approved by the department and
therefore students should consult with the MMAE Graduate Director for assistance
in filling out their program of study. Both thesis and nonthesis options require
30 credit hours of courses and at least half of the credit hours in the program
of study must be at the 6000 level.
A student with an undergraduate
degree outside of the selected departmental discipline may be required to
satisfy an articulation program. Substitutions to the program of study must meet
with the approval of the adviser and the department.
- MAP 2302 Differential Equations
- EML 3034C Modeling Methods in Mechanical and Aerospace Engineering
- EAS 4134 High-Speed Aerodynamics
- EAS 4300 Aerothermodynamics of
Propulsion Systems or EML 4703 Fluid Mechanics II
- EAS 4105 Flight
- EML 4142 Heat Transfer
- EML 5060 Mathematical Methods in
Mechanical, Materials and Aerospace Engineering (3 credit hours)
- EML 5152 Intermediate Heat Transfer (3 credit hours)
- EML 5713 Intermediate
Fluid Mechanics (3 credit hours)
Select one of the following
- EML 5237 Intermediate Mechanics of Materials (3
- EML 5271 Intermediate Dynamics (3 credit hours)
- EML 5311 System Control (3 credit hours)
All students, both thesis and nonthesis, must complete at
least 12 hours of electives from the list below after conferring with their
- EAS 5123 Intermediate Aerodynamics (3 credit
- EAS 6185 Turbulent Flow (3 credit hours)
- EAS 5315
Rocket Propulsion (3 credit hours)
- EML 5713 Intermediate Fluid
Mechanics (3 credit hours)
- EML 6131 Combustion Phenomena (3 credit
- EML 6712 Mechanics of Viscous Flow (3 credit hours)
- EML 5402 Turbomachinery (3 credit hours)
- EML 5105 Gas Kinetics and
Statistical Thermodynamics (3 credit hours)
- EML 6155 Convection Heat
Transfer (3 credit hours)
- EML 6725 Computational Fluid Dynamics and
Heat Transfer I (3 credit hours)
- EAS 5302 Direct Energy Conversion (3
- EAS 6807C Aerospace Measurements Instrumentation (3
- EML 6124 Two-Phase Flow (3 credit hours)
- EML 6726 Computational Fluid Dynamics and Heat Transfer II (3 credit hours)
- EML 6154 Conduction Heat Transfer (3 credit hours)
- EML 5713
Intermediate Fluid Mechanics (3 credit hours)
- EML 6157 Radiation Heat
Transfer (3 credit hours)
- EAS 5123 Intermediate Aerodynamics (3 credit
- EML 6211 Continuum Mechanics (3 credit hours)
- EML 5237
Intermediate Mechanics of Materials (3 credit hours)
- EML 5532C
Computer-Aided Design for Manufacture (3 credit hours)
- EML 5546
Engineering Design with Composite Materials (3 credit hours)
- EML 6547
Engineering Fracture Mechanics in Design (3 credit hours)
Option—6 Credit Hours
The thesis option
requires 6 credit hours of thesis in addition to the required and elective
courses listed above. A student pursuing the thesis program may not register for
thesis credit hours until an advisory committee has been appointed and the
committee has reviewed the program of study and the proposed thesis topic.
- EAS 6971 Thesis (6 credit hours)
students pursuing the thesis option must enroll in the following course:
- EML 5090 Mechanical and Aerospace Seminar (0 credit hours)
Students must register for the seminar course a minimum of two times during
their graduate career in the master's program (thesis option). The students must
also complete the course with a satisfactory (S) grade in both attempts. If the
student does not complete the course with a satisfactory grade, the student will
be asked to repeat the course to meet program requirements.
Option—6 Credit Hours
The nonthesis option is primarily designed to meet
the needs of part-time students and requires one additional elective and EML
6085 Research Methods in MMAE (or XXX 6918 Directed Research, with approval)* as
part of their 30-credit-hour course requirement.
- Elective (3 credit
- EML 6085 Research Methods in MMAE (3 credit hours)
* For students who are not on campus and upon prior approval from the
graduate coordinator, XXX 6918 Directed Research (3 credit hours) may be
substituted as the student's independent learning experience. If the
substitution of XXX 6918 is approved, a letter must be provided by the member of
the faculty supervising the directed research.
EML 6085 (or XXX 6918)
fulfills the independent learning requirement for nonthesis students.
Students in the Aerospace Engineering MSAE program pay
a $90 equipment fee each semester that they are enrolled.
Independent LearningThe independent learning requirement is met by successful completion of a master's thesis for the thesis option. The nonthesis option independent learning experience is provided by the required course EML 6085 Research Methods in MMAE (3 credit hours). For students who are not on campus and upon prior approval from the graduate coordinator, XXX 6918 Directed Research (3 credit hours) may be substituted as the student's independent learning experience. If the substitution of XXX 6918 is approved, a letter must be provided by the member of the faculty supervising the directed research certifying independent learning.
For information on general UCF graduate admissions requirements that apply to all prospective students, please visit the Admissions section of the Graduate Catalog. Applicants must apply online. All requested materials must be submitted by the established deadline.
The College of Engineering and Computer Science strongly encourages prospective applicants to request a free pre-screening (www.cecs.ucf.edu/prescreen) of their qualifications prior to submitting an online application for graduate admission. However, a pre-screening is not required; rather, it is offered as a courtesy to all prospective applicants before they commit to submitting a complete online application and paying an application processing fee.
Admissions decisions are made on the basis of a complete online application only, and not on the basis of any pre-screening. Prospective applicants who are encouraged to apply to their intended graduate program based on the information provided for their pre-screening are not assured of admission or financial assistance when they submit a complete online application. Although it is possible, it is not likely, that prospective applicants who are discouraged from formally applying to a graduate program at the pre-screening stage will be admitted if they elect to submit a complete online application anyway.
In addition to the general UCF graduate application requirements, applicants to this program must provide:
- One official transcript (in a sealed envelope) from each college/university attended.
- Bachelor’s degree in Aerospace Engineering or closely related discipline.
- Statement of educational, research, and professional career objectives.
- Applicants applying to this program who have attended a college/university outside the United States must provide a course-by-course credential evaluation with GPA calculation. Credential evaluations are accepted from World Education Services (WES) or Josef Silny and Associates, Inc. only.
Faculty members may choose to conduct face-to-face or telephone interviews before accepting an applicant into their research program.
Additional courses may be required to correct deficiencies. Students should contact the MMAE graduate program director for further information.
|Thermofluid Aerodynamic Systems Design and Engineering||
||Jan 15||Jul 15||Dec 1||Apr 15|
||Jan 15||Jan 15||Jul 1||Nov 1|
International Transfer Applicants
||Jan 15||Mar 1||Sep 1||Dec 15|
*Applicants who plan to enroll full time in a degree program and who wish to be considered for university fellowships or assistantships should apply by the Fall Priority date.
Graduate students may receive financial assistance through fellowships, assistantships, tuition support, or loans. For more information, see the College of Graduate Studies Funding website
, which describes the types of financial assistance available at UCF and provides general guidance in planning your graduate finances. The Financial Information
section of the Graduate Catalog is another key resource.
Fellowships are awarded based on academic merit to highly qualified students. They are paid to students through the Office of Student Financial Assistance, based on instructions provided by the College of Graduate Studies. Fellowships are given to support a student’s graduate study and do not have a work obligation. For more information, see UCF Graduate Fellowships, which includes descriptions of university fellowships and what you should do to be considered for a fellowship.